Keep this vintage 10K gold plated tie clip close to a tool lovers heart, featuring an applied caliper measuring instrument angled on the center of the clip, circa 1960's. Size: 1 5/8"; Condition is excellent.

A vintage 14K yellow gold tie bar or money clip in the form of three golf clubs. The detailing of the clubs' handles is very nice. The back of the tie bar has an eyelet that can be used to anchor a safety chain if the piece is used as a tie bar. This piece is marked "14K" and was probably made by Larter. Larter made much of the men's gold jewelry for Tiffany & Co., and we have seen this exact piece with Tiffany's hallmark.

Origin: America, ca...

Small cut steel cravat stick pin, Victorian, mid 19th century. Length "1 ¾ / 4.5 cm. Condition: fine.

This is an elegant vintage five piece gray abalone and silver bezel pair of cuff links & stud set in original box, circa 1940-1950, This dress set includes circular cufflinks and three shirt studs, the abalone set in white metal bezels, the backs are the same. unmarked. Black case not shown. Measurements: Cuff links- 1/2 in diameter, Studs-1/4 in dia. approx. Condition is excellent.

Silver tie clip with the Hopi figure of Kokopelli, a fertility deity. Made of two silver plaques; one cut through, the other engraved and oxidized. Engraved cipher mark of the native American Indian silversmith, and stamped mark Bennett Pat. Pend. C-31. Bennet was the inventor of this tie fitting mechanism. Height "1 ½ / 4 cm.

Vintage with a modern flair describes this set of four waist coat/shirt studs, each featuring a lustrous round mother of pearl framed in a white gold pin dot border, made by The J E Caldwell & Co. The back of each stud is 14k yellow gold comprising a spring-load bar. This stud set weighs 8.8 grams. The face measures 5/8 in. diameter. Excellent condition.

A very fine dress set, comprising a pair of barbell cufflinks and four shirt studs fashioned from large South Sea black pearls set in 18K yellow gold. The pearls in the cufflinks are approximate 12.9mm and those in the studs are approximately 10.6mm. The pearls, with good luster and surface condition, are graded as AA quality. The body color of the cufflink pearls are grayish-silver with rose overtones and the stud pearls are blackish-silver with rose and green overtones...

This fine 3-piece set consists of cuff links and a tie bar / clasp. They are sterling silver. Each abacus has beads that actually move - are mechanical. They are 3 dimensional. The cuff links measure, 3/4" x 1/2" x 1/8". The tie bar is just under 2" long. Each piece is marked SILVER STERLING MADE IN HONG KONG. The set is circa 1970 and in excellent condition.

This classic vintage set of waist coat studs will add polish to any formal wear, featuring lustrous round mother of pearl framed in a platinum wheat border, made by The JE Caldwell & Co. The back of each stud is 14k yellow gold comprising an extendable bar attached that allows the stud to be worn inside the shirt. This stud set weighs 7.7grams. The face measures 5/8 in. diameter. Excellent condition.

A fun vintage 14K yellow gold tie bar by Richardson & Co. in the form of a baseball bat. Figural tie bars, often doubling as money clips, were popular from the 1930s to the 50s. They were often sporting themes, such as skis, golf clubs, and fishing rods, but this is the first baseball bat we’ve seen. The back is stamped “14K” and also has Richardson’s hallmark.

• Origin: America, ca...

A crafty set of three vintage shirt studs with 14 karat yellow gold fox heads accented by ruby eyes. Finely crafted and looking for a shirt to embellish. Measuring 1/2 in x 3/8 in. 4.4 dwt.

Rare, heavy and handsome 5-piece dress set by famed 20th century jewelry designer Cipullo. The double-sided cufflinks and studs are designed as highly-detail scallop shells set with cabochon natural rubies. The workmanship is superb, utilizing combinations of highly polished and matte surfaces to achieve realism. The rubies have very rich, even color. The overall style is similar to the shell designs of Verdura...

This is a very fine winter white guilloche enamel in sterling silver two-sided cufflinks and three piece stud set in original case, circa 1920's, unknown maker's mark and STERLING on back of cufflinks. Studs are marked STERLING. Measurements: Cufflinks- 1/2 in diameter, Studs- 1/4 in. diameter. Condition is excellent.

A set of three 14K white gold, diamond and mother-of-pearl shirt studs by Larter. The round faces are set with concave mother-of-pearl discs, each centering a round diamond and surrounded by an ornate beaded border with additional diamonds. The backs are hallmarked by Krementz.

Origin: America, ca. 1915. Condition: excellent. Dimensions: 9 mm (11/32 in) diameter. Approximate Total Diamond Weight: .16 ct...

This is a never -been -worn vintage nine piece abalone and gold filled pair of cufflinks & stud set in original box, circa 1940-1950, This dress set includes cufflinks, four shirt studs and three collar studs, the abalone set in white metal decorated bezels and marked on back GOLD PLATE, . Measurements: Cufflinks- 1/2 in diameter, Studs-7/16 in dia, Collar- 5/16 in. dia. Condition is excellent.

A handsome pair of 14K yellow gold cufflinks and three shirt studs fashioned as buttons. The buttons are nicely detailed, complete with gold “stitches.” The cufflinks are signed “Tiffany & Co.”, the studs are signed “T & Co.”, and each piece has Larter’s 14K manufacturer’s mark.

Origin: America, ca. 1950. Condition: excellent. Size: cufflinks, 9/16” diameter; studs, 5/16” diameter. Weight: 14.3 grams.

A Fathers Day present for an engineer. This is a unique slide rule tie clip made of plastic and gold tone, magnifying cursor, marked SWANK on the clip. Size: 2" long. Excellent condition.

For the passionate woodworker, this vintage SAW BLADE-FORM tie clip features a movable stainless steel blade sawing a piece of mahogany mounted on a gold plated clip, circa 1960. Size: 2 1/4"; Condition is like new.