Hongshan Pig Dragon Ax pendant in Nephrite Jade, beautiful piece with a pig dragon on top of a small jade ax heavy wear and wonderful surface patina . Tremolite throughout. Collected HK 1980-1995. Size 2.75" by 1.5" weight 36 G
Hongshan Tall figural chisel ax blade pendant in Nephrite Jade. The figure probably depicts a female goddess and surface tremolite throughout. The back showing heavy wear from tong term use . The back had biconically drilled holes. Size 4" W just under 1"
Hongshan Turquoise or Malachite totem pendant . Beautiful stone carved with a snarled nose frowning face the end with eyes seems to be a cicada when laying flat. Biconically drilled suspension holes with mineral deposits . Weight 34 g size just under 3" by .75"
Ancient Chinese Hongshan Nephrite Jade C shaped Pig Dragon Pendant. Pig dragon type in a C shape or embryo. The jade is covered in tremolite mineral from extended burial the biconically drilled off set suspension hole with mineral deposits the sides of the sculpture shown extensive smoothing from long term use. Collected in HK 1980-1995 . Size 2" H by 2"W weight 22G
Chinese Archaic Nephrite Jade Cloud pendant or Clothing attachment , fine stone well carved with tremolite front and back . The carving has 2 very small attachment holes . Soil deposits as seen on the front. collected HK 1980-1995. just over 2" by 2"
Hongshan nephrite Jade Zhulong pig dragon ax pendant . the pendant has biconically drilled suspension holes with mineral deposits as well as tremolite throughout the stone is also metallic slightly holding a magnet. The piece shows heavy signs wear to the sides due to extended wear. Size 2.75" high 2.5" wide weight 68 G
Pair of large Chinese Republic period baluster form vases decorated with mirror image famille rose enamelled bird and flower motifs. Black inscription to the back includes Tianjin and the date in cycle years of 1932. There is a prominent luting line in the neck and a barely visible luting line at the mid-section. 17 1/8” and 17 1/4" high. Very good overall condition. They were previously drilled for lamps and the holes in the bottom have been professionally restored...
Nepal 16-18th C Copper and silver Dipankara Buddha . The sculpture done in a copper alloy with silver inlay to the forehead the palms of the hands as well as the front and back of the skirt. Very well sculpted and cast. Showing extensive signs of use from wear to black altar soot , note the base where the rim edge has nearly worn away the metal slivers used to hold the base plate on...
1930's Chinese Agate Carved Lady Figurine with Wood Stand
It is 12 inches (30.5 cm) tall measured with stand and 10.6 inches (27 cm) tall by 4.3 inches (11 cm) wide measured without stand. It is 1792 gram without stand (4.2 Lb) with stand.
The agate has inclusions, flea bite chips and surface wears and scratches. The wood carved stand has surface wears and scratches (as seen in the photos).
Our Guarantee: We stand behind all of the items that we sell...
Pair of (1930's) Japanese Cloisonne Enamel Vase with Dragon & Phoenix
Each is 6 inches (15.2 cm) tall by 2.2 inches (5.5 cm) wide. Total weight is 289 gram.
One of the vase has loss of enamel, bruises, and cracks at the lip and side. Another vase has a possible repair at the base (as seen in the photos).
Our Guarantee: We stand behind all of the items that we sell...
1930's Japanese Mixed Metal Cane Handle with Dragon & Phoenix
It is 5.35 inches (13.6 cm) in length by 1.2 inches (3 cm) wide. It is 67.3 gram.
It has rubbing of gold, oxidation, rust, and surface wears and scratches (as seen in the photos).
Our Guarantee: We stand behind all of the items that we sell. That is to say, if you purchase an item from us and are unhappy with it for any reason, return it for a 100% refund of the amount you originally paid...
This By the noted and talented Italian designer Arrigo Finzi (1890-1973), this charger is one of few made with this surrealist compilation of masks.
Measures 12 3/4" in diameter, and 1 3/4" deep, of heavy porcelain.
Signed on back with Finzi signature, "oro zecchino" and "Depinto a mano".
Very few of these were made, and all were hand decorated.
The surface is highly textured and gilded with a high content gold, the color rich and deep...
Anthropomorphic dance figure. Wood and pigments. It has moving arms that are tied to the head. Ca. Mid 20th century or earlier. H. 73 cm. The Eket are a sub group of the Ibibio. Their material is quite rare.
Provenance:
Robert van der Heijden, Amsterdam,
Srdjan Sremac, The Hague.
OMEGA MOONWALK CHRONOGRAPH CASE Frame with Buttons and crystal. 42mm diameter and 48mm in length. Includes the GASKET, both chronograph buttons, and the original Lucite Crystal (with the OMEGA Logo in the center). Unused, distraction free. Genuine Omega Part created as a service frame replacement for Speedmaster Reference Nos:
145.009
145.012
145.022
145.0022
THIS IS A FINE COLLECTIBLE. DON'T INVEST IN THE STOCK MARKET. BUY SOMETHING PROVEN IN TIME.
Free U.S. Shipping...
Large size Lenox Rose Pattern Porcelain and Sterling Rim serving Charger, Platter, Ca. 1930's, 14 1/2" diameter, 3" high, and 1" wide for Sterling Rim with repoussé repeated pattern and multiple smaller rose and floral design in outer circle, and large bouquet of floral design in the center. Marked "Lenox, made in USA" in green, "Lenox Rose" in purple plus sterling marked "Wallace Sterling 4179" on the bottom. The condition is good, no damages.
Indian palm leaf manuscript showing Krishna playing his flute whilst being offered pan by Rada, decorated border. Red tassels at top. Nicely mounted and framed under glass. Image 31x25 cm. Can be viewed in central London and shipped worldwide. Will be removed from frame for shipping. Undated, estimated to be mid 20th century.
Rare Yoni Lingam Ceremonial Vessel for Holy Water 17th – 18th Century. Rare Copper Antique Yoni/Shiva Lingam Ceremonial Vessel for Holy Water .This rare tear-shaped vessel has been beautifully forged from hand-beaten copper, and features a centrally placed pointed lingam set within the bowl, with a matching navel underneath with an inscription. This is from Nepal India Himalayan region. Good condition though thee are some dents from age and use.
L 12.75 x W 6 x H 3 inches
Chinese Boxwood Carved Happy Buddha, Circa 1940's
It is 9.6 inches (24.5 cm) tall by 8.3 inches (21 cm) wide. It is 7.5 Lb.
It has hairline cracks and surface wears and scratches (as seen in the photos).
Our Guarantee: We stand behind all of the items that we sell. That is to say, if you purchase an item from us and are unhappy with it for any reason, return it for a 100% refund of the amount you originally paid...