Circa: approx. 1880. ELGIN NATIONAL WATCH CO. MOVEMENT TIN 18 Size, Screw Off with solid Top and Back with Coin Edges on both sides for a better grip. Salesman and merchants used these tins to protect movements from damage when transporting or storage. 50mm diameter and 26mm thick. Edge marked: ELGIN NATIONAL WATCH CO. Factory new and never used! THIS IS A FINE COLLECTIBLE. DON'T INVEST IN THE STOCK MARKET or BONDS. BUY HARD ASSETS, SOMETHING PROVEN IN TIME...

Very scarce Key Wind and Key Set from the rear. 3/4 Plate gilt, 7j, #44,488 (Low Number). The case is in especially wonderful condition, free of any distraction. The original dial has some hairlines at the sub. seconds circle, which does not distract. Clean, running and very nice. LANCASTER W. Co. New Era Mint original 3oz. Coin Silver Open Face Case Pre-Hamilton. THIS IS A FINE COLLECTIBLE, DON'T INVEST IN BONDS or STOCKS. BUY HARD ASSETS PROVEN IN TIME...

ROCKFORD WATCH CO. Rockford, Illinois 1873 – 1915 The Rockford Watch Company’s equipment was bought from the Cornell Watch Col, and two of Cornell’s employees, C.W. Parker and P.H. Wheeler, went to work for Rockford. The factory was located 93 miles from Chicago on the Rock River. The first watch was placed on the market on May 1, 1876. They were key wind, 18 size, full plate expansion balance and dials made by outside contract...

HAMPDEN 18s RAILWAIY SPECIAL PORCELAIN RR Porcelain Dial NOS. Double sunk Dial. Just removed from Hampden dial factory RR inventory. Never used. Associated with the Hampden Railroad series; Railway and 23j Railway Special. Perfect condition. Hunting Model Dial. THIS IS A FINE COLLECTIBLE. DON'T INVEST IN BONDS or STOCKS. BUY HARD ASSETS PROVEN IN TIME...

AMERICAN W.Co.14k GOLD 18 Size Hunting Model 1879 FIRE COMMINISSIONER's Retirement watch; presented by his officers and men November 19, 1879. 18 size, hunting model, 15 jewels, lever set to change the time, "P.S. Bartlett" Model, Serial No. 1,159,844. The white porcelain dial is free of distraction and marked: AMERICAN WATCH CO. This original case is English marked with the English Lyon for the 14k gold American market in 1879...

AMERICAN WATCH Co. 6 Size Gilt Movement Tin Pat'd 1885-1892. Screw off, Patented dates on front and marked: "Pat'd Aug. 27.95" on the edge. This movement storage tin is in excellent condition and includes the original instructions for storage and shipping movements inside of the inside botton0m half. THIS IS A FINE COLLECTIBLE. DON'T INVEST IN THE STOCK MARKET or BONDS. BUY HARD ASSETS, SOMETHING PROVEN IN TIME.

NOTE: We have been selling vintage watches on E-Bay since 1998 as wat...

Circa: approx. 1880. Very Rare ROCKFORD 16 size movement presentation Tin. Marked "ROCKFORD WATCH CO. ROCKFORD ILL/Patd May 14, 1907". NOS never used. Screw Off with solid Top and Back with Coin Edges on both sides for a better grip. Salesman and merchants used these tins to protect movements from damage when transporting or storage. 50mm diameter and 26mm thick. Edge marked with the original glass on both sides. THIS IS A FINE COLLECTIBLE. DON'T INVEST IN THE STOCK MARKET or BONDS. BUY HAR...

Offered in this grouping are ten, 19th century, antique tools, seven of which represent the woodworking trade. Collectively, as displayed in the feature photo, these wonderful vintage pieces make a stunning wall display. For the advanced craftsman, these vintage tools remain completely functional and offer one that opportunity to step back in time and create using historic implements.

1) A C1870, American, very appealing, rather primitive IRON SQUARE measuring 24 inches in length on the l...

An unusual pair of large iron shears with a wonderful surface. Excellent condition and movement. 16 inches long by 5 inches wide.

Offered is a handsome, C1870s, woodworkers, Adjustable Dado Plane. It is marked "W.COATES 57 BRIDGE STREET - MANCHESTER" and is most likely of English origin.

Dado planes are designed to cut a groove across the wood's grain. The front-mounted nicker iron would score the edge of the groove and thus avoid splitting and lifting the grain. The adjustable depth stop (which is controlled by the brass screw on top) regulates how deep the blade cuts into the wood.

This plane cuts 1/2 inch grooves ...

Rare Native American carved steatite two-bear effigy pipe. Great Lakes region. Circa 1850. A museum quality pipe with traces of red and black paint still evident. Excellent condition. Size: 10 7/8 inches length x 3 3/4 inches ht.

Offered are two desirable hand tools from the mid 19th century.

The first tool is a diminutive hammer which was probably used to drive small nails and tacks. The handle measures 8.5 inches long and sports a shapely head made of iron. This hand wrought primitive tool has a nice original patina and shows wear commensurate with age.

The second tool is called a RACE KNIFE which was a tool of the carpenter, cooper, lumberman and shipwright. The hooked blade scored timbers, staves, or logs with i...

Miniature umbrella made of bone and wood, Victorian, late 19th century. Either a toothpick or a bodkin/fid for punching holes in order to keep threads apart in English embroidery / Broderie Anglaise and for other sewing purposes. "2/ 5.7 cm. Condition: fine.

Offered is a wonderfully hand-crafted, mid-19th century, woodworking, HAND SCRAPER PLANE.

This circa 1860s example has an expertly carved, smooth-angled handle that ends in a flourished, curl-like shape. The overall form of the tool, when viewed in profile, takes on a somewhat futuristic, space-age design- an interesting concept given that this tool is approximately 160 years old! This handsome tool measures 8.25 inches long and sports a warm, aged, brownish patina.

The condition is commen...

Circa: approx. 1880. ELGIN NATIONAL WATCH CO. MOVEMENT GILT TIN 18 Size, Screw Off with solid Top and Back with Coin Edges on both sides for a better grip. Salesman and merchants used these tins to protect movements from damage when transporting or storage. 50mm diameter and 26mm thick. Edge marked: ELGIN NATIONAL WATCH CO. Factory new and never used! THIS IS A FINE COLLECTIBLE. DON'T INVEST IN THE STOCK MARKET or BONDS. BUY HARD ASSETS, SOMETHING PROVEN IN TIME. NOTE: We have been selli...

Offered is an early portable Steelyard scale that is designed to weigh goods up to 30 pounds. This primitive iron scale sports hand-forging construction and measures just over 13 inches in length. The manufacturer's identifying name is almost fully readable and is stamped "?? WHITHFIELD & SONS".

The arm on one side is stamped in increments 1 through 9 (pounds) and 7-30 on the opposite side. Photo #5 shows two fancy and not often seen, "cross-shaped" embellishments.

The condition is very goo...

Hard-to-find English barrel shaped wooden string holder with a pedestal base. Made of lignum vitae wood, the dispensing end has a twist off opening. Circa 1860-1880 it is still a useful object and a great find for the collector. Overall condition is good with only a small chip on the base. Has a beautiful warm patina and measures 5" long at base, 5.5" wide at back, 6.5" high.

Offered is a wonderfully hand-crafted, circa 1870's TONGUE PLANE.

This early example measures 12.5 inches long and sports a lovely aged brownish patina. The toe of the plane has the owner's initials, "L.C.", boldly-stamped upon it.

The condition is commensurate with a modestly-used antique hand tool. There are the expected unobtrusive small dings, scratches and imperfections typically seen in vintage tools. The base of the handle has a 4 inch split that does not effect the integrity of the...

Offered is a wonderful example of mid-19th century craftsmanship. This elegantly designed HAND ADZE exhibits a perfectly formed handle that fits in the palm of one's hand like a glove!

Hand adzes, which are swung with one hand, are used for smoothing or carving wood. This early adze with its captivating, primitive look exhibits appropriate wear commensurate with a modestly used tool of some 160 years of age. Various dings, scratches, wood loss are evident in this piece yet add wonderful char...

S.B. Champlin Company Providence, RI 1872 - 1934

A sharply angled, almost-triangular-plan 5-story brick industrial building, this was constructed by the S.B. Champlin Company (established 1872) to house its manufacturing of gold rings and gold-filled chains as well as provide rental space for other jewelry manufacturers, an own-and-rent practice then common in the jewelry industry and characteristic of neighboring contemporary buildings in the Jewelry District. The building was so s...

Offered is a wonderfully hand-crafted, 19th century SMOOTHING PLANE.

This lovely example has a subtle, coffin-shape form and sports a dovetailed base that was expertly joined. This handsome tool measures 7.25 inches long and retains its original, aged, brownish patina. The owner's initials, "N.S", are stamped on the heel of this plane.

The condition is commensurate with a mildly-used, antique hand tool. There are the expected unobtrusive small dings, scratches and imperfections typically s...

This is a really great frog themed walking stick. This stick is dated 1894 with a silver collar and red glass eyes. This stick also has an ebony shaft and a metal ferrule. This stick measures 36" x 4" x 1". The handle itself is 1 1/2" x 4" x 1". The collar is 2" and the ferrule is 1". Such an awesome stick!

Handle is 1 1/2 inches high and 4 1/2 inches to the side, well carved handle with a beaded overlay of silver, engraved silver collar “Colonel E. F. Gosset”, thick ebony shaft and a horn ferrule. Overall length of the cane is 35 1/2 inches. Condition Report: Good condition

The handle is bronze patinated metal and mounted on a sturdy "bark on" hickory shaft with a long ferrule. The cane dates to the very early 19th century. It is in great condition for its age! Note: This cane never had glass eyes. Circa 1800. Condition (Excellent). Size 38" L.

Fine British antique dress cane with sterling silver ball handle with fabulous design and silver collar with the English full hallmarks and bronze ferrule, 19th century era. Size: Silver handle ball has a diameter of 1 1/2 inches, and overall length is 36 3/4 inches long. Condition Report: Fair condition.

This great carved ivory walking stick features a wonderful cockatoo with beautiful blue glass eyes. This stick has a coin silver British collar, ebony shaft and metal ferrule. This stick measures 37 1/4" x 1 1/4" x 1". The handle is 3" x 1 1/4" x 1". The collar is 1/4" and the ferrule is 1". A very nice stick!

Skull Vine Cane-Ca. 1890-An unusual skull which is carved atop a thick wild vine and a metal ferrule-O.L. 34 ½”.

Elk Hunting Cane-Late 19th Century-A high relief cast handle of hounds and elks, sterling silver signed 925 plus other unreadable hallmarks, hardwood shaft and a horn ferrule-H. 2 ½” x 1 ½”, O.L. 36”

Chinese Silver/Stingray Tail Cane-Ca. 1890-A cast silver handle with a fierce dragon and bamboo shoots, shaft is a natural stingray tail and a metal ferrule-H. 5” x 4”, O.L. 35 ½”.

Japanese silver mascot cane-Ca. 1890-Sizeable silver knob chased and engraved in high relief and very fine detail with an encircling dragon on the side and a round shield with traditional Fu calligraphy inscriptions conveying wishes of good luck and long life on the top. Rosewood shaft. Size; Handle measures 3 ¼” x 1 ¼”, Overall height of cane 36 1/4 inches. Excellent condition.

Feminine Silver Dress Cane-Ca. 1890-Silver handle hand chased and engraved with various panels of different flowers, scrolls and shells on its stretching stem and with a crown of flowers on the round and flattened knob, mahogany shaft and a copper ferrule. Superb condition. Size; Handle is H. 3” x 1”, overall length 40 ½ inches.

Antique Cane with dog-form carved ivory handle and a gold collar inscribed: "From Wm. Henrie on his 75th birthday, November 6th 1874"

Length: 35"

**Regarding the Sale of Items Incorporating Materials from Endangered Species: An export license issued by the U.S. Fish and Wildlife Service will be required for the export of this item from the U.S. Prospective purchasers are responsible for obtaining this form.

Folk Art Monkey Cane-Ca. 1880-A one-piece carved cane with a hand grasping a baby monkey with two color glass eyes, natural bark shaft and a brass ferrule-O.L. 33”.

The carved handle is 2 1/4 inches high and 1 1/2 inches to the side.. There is a ornate metal collar and natural branch shaft with varved bone dots inlaid on twigspurs and a metal ferrule. Overall length of the cane is 34 inches. Condition Report: Fair condition

Description: Superbly executed and finely detailed cloisonne Dress Cane, Meiji Period. A one color cane with fine silver and enameling work. It is in great condition with ebony shaft. The handle measures 1 3/4" x 3 1/2" and overall length of the cane is 35 1/2 inches.

Mounted on a scorched knobby shaft. With stag ferrule. Excellent carving on handle with milk glass eyes. Engraved silver collar. Circa 1885. Condition (Excellent). Size 31" L.