Carl Tasha modernist serpent pendant
Provincetown, MA
1970
This massive and exquisitely detailed work of art measures 5 1/4" tall x 3" across
Weight - a solid 118 grams
Cast brass or bronze
Signed on verso - C. Tasha in script and stamped C. Tasha in block letters, 153/1000
Excellent vintage condition
A very unusual hand wrought copper necklace with lightly hammered curved links. The end of each link slips through a small slit and is then hammered flat so it won't come out. Hard to explain but ingenious!
The necklace measures approximately 34" around. There is no clasp, meant to slide over the head. Unsigned.
In very nice condition with a dark warm patina and lots of attention to detail.
Fine hand wrought work.
A fun pair of screw back earrings and a matching pendant necklace by Casa Maya with growling dogs in brass and copper with green enamel.
May be purchased individually or as a set.
The large pendant measures 2 7/8" long with the bale and 2" across. It has the original chain with alternating brass and copper links. The chain measures 17" long and has a secure hook closure. This pendant necklace is signed on the back with an impressed MAYA Mexico...
Carl Tasha nude figural brass belt buckle
C. 1970
Provincetown, Mass
4 1/4" x 2"
Marked on top and reverse
Very good vintage condition
Brutalist brass necklace
Hand crafted studio jewelry
1960s - 70s
Center element measures 5" x 5"
Neck ring - 14 1/2" round
Weight - 116 grams
Unmarked
Excellent vintage condition
Carl Tasha brass crab pendant
1970's
2" x 2 1/4"
Marked Tasha
Excellent vintage condition
This 1960s pendant is composed of what appears to be a very thickly molded pewter, roughly finished and suspended from a sturdy cable chain. The back of the pendant bears an unidentified maker’s mark of Å.A. Pendant measures 3 1/8 inches long by 2 5/8 inches wide. The entire necklace, including pendant and chain, drops almost 17 inches; it does not have a clasp.
A bronze pendant and probably copper chain by Hannu Ikonen of Finland in the iconic Reindeer Moss design. Pendant measures almost 2" long including the bale and 1 1/2" across. Marked Made in Finland on the back of the pendant. Chain measures 27" long and has a hook closure. Nice warm patina. We have the matching clip earrings in another listing. Will combine shipping.
A vintage kinetic, sculptural lightly hand hammered brass pendant similar to the work of Harry Bertoia.
Features four concentric circles with random openings and a matching hammered brass hook closure. Pendant measures 2 1/2" long and 1 3/4" across. Chain measures 21" long.
In fine condition with a little tarnish. Lots of movement.
A large copper, brass and silver cuff bracelet from Casa Maya with two large stylized birds. Measures about 6" around with an opening of 1 1/4" and 2 1/2" tall. In nice condition, has some minor surface scratches. A little out of round, some wear to the edges and some tarnish. Signed Maya Mexico. Looks striking on!
This continuous chain is beautifully made, composed of tiny rectangles that are attached in perpendicular links. It has a substantial feel and has a seamless, snake-like movement. It works with a pendant or as a classic look by itself, doubled or tripled. Doubled, the chain measures 29 ¼ inches long. It is unmarked, and has a soft patina like old silver; it is probably silver plated, and dates from the 1960s or 1970s.
This impressive necklace bears the mark of jewelry designer Jacob Hull and the firm Buch and Deichmann, of Bagsvaerd, Denmark (1969-1980). Hull worked primarily in high quality silverplate, producing innovative designs of fine workmanship. The necklace has some heft, and is composed of irregular-shaped dollops of plated molten metal flanked by oblong links. Unhooked, it measures 32 ¼ inches long. Weight: 65.9 grams
This roughly-made pewter pendant has a hammered-look surface and the look of an ancient Nordic medallion. It has its original chain, which is secured with a spring-ring clasp. The pendant bears the mark of Norwegian workshop Troll-Tinn, of Åndalsnes, and has its original chain. The pendant measures 5 ½ inches long, including the bale, and 2 3/8 inches wide; clasped, the entire necklace measures just under 14 ¾ inches long.
This interesting openwork bronze pin is formed as a stylized horse and is based on ancient Nordic design. It has a lacquered finish to preserve the surface color of the bronze. The back has a secure curled C-clasped and the mark of Finnish maker Koravala Koru. The name of Suomussalmi, a region in Finland, is inscribed on the back as well. The pin measures 2 inches long by about 1 ¾ inches high at the ear.
Carl Tasha modernist brass buckle
Provincetown, MA
1970's
2 1/2" x 2 3/8"
Marked C.Tasha
Very good vintage condition
Here is a hand-constructed cuff bracelet made of multiple wires that are joined at the terminals and kept in place by horizontal rings. The wires look to be silverplated; the rings and soldered terminals are white metal. The cuff has a good heft (56 grams) and an impressive look. It is also well balanced, so doesn't turn on the wrist. It measures a little over 1 inch wide and 5/8 inch high with an inner circumference of about 7 ¼ inches.
A vintage hand made pendant with an agate like stone held in place by tentacles reminiscent of the work of Carl Tasha or Richard Kaish in bronze or brass.
The pendant measures 2 7/8" long and 1 3/8" at the widest. It has lots of detail. Has a pale grey striated jewel in the center. Not sure if it is agate or art glass.
Currently suspended from a neck ring that measures about 15" around with a secure hook...
Rafael Alfandary large modernist brass and clear glass cabochon necklace
1970s
Canada
Pendant - 8" long
Neck chain extends to 22 1/2"
Weight - a hefty 122+ grams
Marked Rafael in script and Canada on verso
Very good vintage condition
